Unirac 20 ea splice bars
Product Item Code: 014-01267
| Quantity | Price |
|---|---|
| 1 - 2 (items) | $76.58 |
| 3 - 9 (items) | $75.28 |
| 10 - 49 (items) | $73.99 |
| 50 - 99 (items) | $72.69 |
| 100+ (items) | $71.39 |
| Old Price |
|---|
| $ |
| $ |
| $ |
| $ |
| $ |
Prices are subject to change without notice.
| Manufacturer / Brand |
Unirac |
| Model / Part. No. | 310229 |
| Unirac part | 310229 |
| Wt. (lbs) | 10 |
Splice bars are used to join together lengths of SolarMount Standard
Rail, SolarMount Light Rail, or SunFrame. Splice plates are
also structural and may be used only with SolarMount Standard
Rail.
Neither type creates a joint that is as strong as the rail itself. A
rail should always be supported by more than one footing on both
sides of the splice.
Expansion joints allow for thermal expansion and may be necessary when rails exceed 30 feet. Only splice bars may be used for thermal expansion joint. To create an expansion joint, slide the splice bar into the footing slots of both rail lengths. Leave a half inch between the segments. Secure the splice bar with two screws on one side only. Footings (such as L-feet or standoffs) should be secured normally on both sides of the splice. No PV module should straddle the expansion joint.
Expansion joints allow for thermal expansion and may be necessary when rails exceed 30 feet. Only splice bars may be used for thermal expansion joint. To create an expansion joint, slide the splice bar into the footing slots of both rail lengths. Leave a half inch between the segments. Secure the splice bar with two screws on one side only. Footings (such as L-feet or standoffs) should be secured normally on both sides of the splice. No PV module should straddle the expansion joint.
Related Products
Other Customers were Interested in...
|
BP3125 $34.52 
|
AE80HE, AE90HE (44 inch) $38.94 
|
CreoTecc Aluminium Bottom Mount Roof Hook $31.95 
|
