XANTREX XANBUS SYSTEM CONTROL PANEL
Product Item Code: 030-01197
| Quantity | Price |
|---|---|
| 1 - 2 (items) | $187.00 |
| 3 - 9 (items) | $184.25 |
| 10 - 49 (items) | $181.50 |
| 50 - 99 (items) | $178.75 |
| 100+ (items) | $176.00 |
| Old Price |
|---|
| $205.70 |
| $202.68 |
| $199.65 |
| $196.63 |
| $193.60 |
Prices are subject to change without notice.
| Weight | 10.75 lb (4.8 kg) |
| CEC efficiency | 95.0% |
| Dimensions H x W x D | 14 ½ × 5 ¾ × 5 ½” (368 × 146 × 138 mm) |
| CEC efficiency 208/240 | 94.5% / 95% |
| Max DC array voltage | 600 volts |
| DC voltage | 12 VDC |
The Xantrex XW Solar Charge Controller is a photovoltaic (PV) charge controller that tracks the electrical maximum power point of a PV array to deliver the maximum available current for charging batteries. When charging, the XW Solar Charge Controller regulates battery voltage and output current based on the amount of energy available from the PV array and state-of-charge of the battery.
Maximum Power Point Tracking (MPPT) delivers maximum available power from PV array to battery bank
Integrated PV ground-fault protection
Ultra-reliable, convection-cooled design does not require a cooling fan − large, aluminum, die-cast heat-sink allows full output current up to 45°C without thermal derating
Selectable two or three stage charging algorithms with manual equalization to maximize system
performance and improve battery life
Configurable auxiliary output
Two-line, 16-character liquid crystal display (LCD) and four buttons for configuration
and system monitoring
Input over-voltage and under-voltage protection, output over-current protection, and backfeed
(reverse current) protection (warning and fault messages appear on LCD when unit shuts down as a protective measure)
Over-temperature protection and power derating when output power and ambient temperature are high
Battery Temperature Sensor (BTS) included − automatically provides temperaturecompensated
battery charging
Xanbus™-enabled network communications protocol (developed by Xantrex)
Communicates settings and activity to other Xanbus-enabled devices, such as the XW Hybrid
Inverter/Charger, the XW System Control (XW SCP), XW Automatic Generator Start (XW AGS),
and other XW Solar Charge Controllers
Product features
Maximum Power Point Tracking (MPPT) delivers maximum available power from PV array to battery bank
Integrated PV ground-fault protection
Ultra-reliable, convection-cooled design does not require a cooling fan − large, aluminum, die-cast heat-sink allows full output current up to 45°C without thermal derating
Selectable two or three stage charging algorithms with manual equalization to maximize system
performance and improve battery life
Configurable auxiliary output
Two-line, 16-character liquid crystal display (LCD) and four buttons for configuration
and system monitoring
Input over-voltage and under-voltage protection, output over-current protection, and backfeed
(reverse current) protection (warning and fault messages appear on LCD when unit shuts down as a protective measure)
Over-temperature protection and power derating when output power and ambient temperature are high
Battery Temperature Sensor (BTS) included − automatically provides temperaturecompensated
battery charging
Xanbus™-enabled network communications protocol (developed by Xantrex)
Communicates settings and activity to other Xanbus-enabled devices, such as the XW Hybrid
Inverter/Charger, the XW System Control (XW SCP), XW Automatic Generator Start (XW AGS),
and other XW Solar Charge Controllers
Related Products
|
Xantrex Communications gateway $486.2 
|
Xantrex GT100-208 Grid-Tie Inverter $56563.5 
|
Xantrex XW-conduit box $187 
|
|
Xantrex XPower Powerpack 1500 $405.98 
|
Xantrex GT2.8 Inverter $1771.66 
|
XANTREX NETWORK CABLE 75 $40.47 
|
|
Xantrex GT Solar Inverter Monitor $204.6 
|
XANTREX RS3000 SINE WAVE INVERTER $1566.52 
|
Xantrex GT100-480 Grid-Tie Inverter $56563.5 
|
